Contact Us

Mob: +8613736799800
Address:Room 415, No.11 Wenqu South Road, Wenzhou, China. 32500

Home > Knowledge > Content
Principle of slitting machine
Oct 11, 2018

1. The paper slitting machine should carry out fixed length slitting processing of the whole roll or whole raw materials, such as plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. control.

2. The cutting length can be set continuously. If there is an error in the actual cutting length, it is easy to calibrate by setting parameters.

3. Paper slitting machine slitting control is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not The cutting signal is sent out at the stop, and the slitting machine dynamically cuts the machining during the movement of the material.

Structural advantage

The middle part of the paper tube slitting machine is equipped with a spindle for processing a paper tube. The front end of the spindle is fixed on the base by a set of bearings, and a pulley is installed in the middle of a set of bearings; a compression cylinder is installed at a position close to the base, and the support of the cylinder A set of support rod bearings are mounted on the upper end of the rod to support the main shaft.

A main cutter shaft is mounted on the upper end of the paper tube slitter, and a plurality of blades are arranged thereon, and arranged according to a certain gap; a support frame of the main cutter shaft is further disposed at the top of the paper tube slitter, and the support frame is A supporting cylinder is installed in the middle.

The structural advantages of the paper tube slitting machine fill the blank of the automatic pipe cutting machine technology.

Previous: Use of paper straws