Contact Us

Mob: +8613736799800
Tel:+86-057-86275785
E-mail:feiton@feiton-factory.com
sales@feiton-factory.com
Address:Room 415, No.11 Wenqu South Road, Wenzhou, China. 32500

Home > News > Content
Flatbed Die Cutting Machine
Oct 11, 2018

The plate and the cutting mechanism of the flat die-cutting machine are all flat, and the vertical flat die-cutting machine is used when the plane of the platen and the platen are in the vertical position. When the die-cutting machine is working, the pressure plate presses the plate against the plate and presses the plate. The movement trajectory of the pressing plate can be divided into two categories: one is that the pressing plate swings around the fixed hinge, so at the moment of starting the molding, there is a certain inclination angle between the working surface of the pressing plate and the stencil surface, so that the die cutting plate is cut into the lower part of the cardboard earlier. This is likely to cause the pressure in the lower part of the mold plate to be too heavy and the upper part not completely cut through. In addition, the component of the die-cutting pressure can also cause lateral displacement of the cardboard. Another type of platen moving mechanism die-cutting machine is working, the pressure plate is driven by the connecting rod, firstly uses the cylindrical roller as a fulcrum, and swings on the flat rail of the machine base, and the working surface of the pressing plate is tilted to the molded version. In parallel positions, the die-cut is pressed in parallel in translation.


The vertical type has the advantages of simple structure, convenient maintenance, easy to grasp its operation and replacement of the die-cutting indentation plate, but the labor intensity is large, the production efficiency is low, and the number of work per minute is 20 times to 30 times, which is often used for small batch production. .


The platen and the platen working surface of the horizontal flat die-cutting machine are horizontally positioned, and the lower platen is driven by the mechanism to press upward against the plate to perform die-cutting and indentation.


Since the stroke of the horizontal die-cutting machine press plate is small, it is difficult to manually insert or remove the paperboard, so it usually has an automatic paper feeding system, and its overall structure is similar to that of a sheet-fed offset printing machine. Input system, die-cut part, cardboard output part, electrical control, mechanical transmission, etc., and some also have automatic cleaning device.


The horizontal flat die cutting machine works safely and reliably, and its automation degree and production efficiency are relatively high. It is an advanced model in the flat die cutting machine.