Contact Us

Mob: +8613736799800
Address:Room 415, No.11 Wenqu South Road, Wenzhou, China. 32500

Home > News > Content
Introduction To Slitting Machine
Oct 11, 2018

The slitting machine is a prepressing and postpressing machine that cuts a large roll of paper, film, non-woven fabric, aluminum foil, mica tape and other thin materials into small rolls of different widths, which are commonly used in papermaking machinery and printing and packaging machinery.

In the past, the speed of the magnetic powder clutch of the slitting machine could not be high, because it would easily cause high-speed friction of the magnetic powder during operation, generate high temperature, shorten its life, and it would be stuck in serious cases, which would hinder the operation of the machine and bring serious consequences to the production. strict

Heavy impact on production efficiency. Now it is controlled by double-conversion motor, so that the magnetic powder friction is controlled to a certain value by the variable frequency motor control when the diameter of the winding material becomes larger. There is no high temperature.

The traditional control scheme of the slitter is to use a large motor to drive the shaft of the rewinding and unwinding. A magnetic powder clutch is added to the reel and reel, and the resistance generated by the magnetic clutch is controlled to control the tension of the surface of the material. . Magnetic powder clutches and brakes are special automatic actuators that transmit torque through the magnetic powder filled in the working gap. The magnetic current can be changed to change the magnetic state of the magnetic powder, and then the transmitted torque can be adjusted. It can be used for stepless speed regulation from zero to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed control system. It is also used to adjust the torque by adjusting the current to ensure an unwinding or rewinding tension control system with constant tension during winding.

The slitting machine continuously controls from single motor to double motor, and the three motors develop more stable and efficient when the machine speed is faster. The main feature of the slitter is that the magnetic powder clutch acts as a resistance device and outputs a DC voltage through the system control to control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive device that can control small tensions.

Disadvantages: The speed is not high, and the high-speed friction of the magnetic powder is easy to occur at high speed, which causes high temperature, which causes the magnetic powder clutch to heat up and shorten its life. The cutter is used to cut a certain width of the web longitudinally and cut into several devices for narrower slits. After being installed in a unit such as a calender or an extruder or a glue applicator, the continuous cutting can be completed, often with a winding device. The knife can be used with a flat knife and a round knife.

The cutting machine series of paper processing machinery: paper cutting machine, small paper cutting machine, web cutting machine, high speed slitting machine, etc. Metal processing machinery slitting machine: strip slitting machine, copper plate slitting machine, aluminum plate slitting machine, stainless steel slitting machine, tinplate slitting machine, etc.